- Description
- Specifications
- Description
- Media
Description
ECO-TERM HG series heat generators with a capacity of 50,000 to 500,000 kcal/h are designed for fast delivery of a large volume of hot air into heated premises.
ECO-TERM heat generators are successfully used to heat poultry farms, greenhouses, paint shops, residential and industrial premises, schools, kindergartens, gyms, churches and wood-drying shops.
| Model | HG 400 | ||
| Capacity, kcal | 400 000 | ||
| Capacity, kW | 464 | ||
| Dimensions, mm | A | Length | 2550 |
| A1 | Service area | 2000 | |
| B | Width | 1600 | |
| B1 | Width with hopper | 2500 | |
| B2 | Auger service area | 1500 | |
| H | Height | 2400 | |
| C | Axial fan cylinder length | 800 | |
| D | Chimney diameter | 350×230 | |
| E | Heated air outlet diameter | Ø500 | |
| G | Air inlet diameter | Ø800 | |
| Operating voltage | 380 | ||
| Total power consumption, kW | 6,5 | ||
| Capacity, m³ of hot air | 24000 | ||
| Maximum outlet air temperature | 150 | ||
| Hopper capacity, kg | 300 | ||
| Price | FCA Istanbul (shipment from the Istanbul warehouse) | On request | |
The boiler burner is made for burning fine-fraction solid fuel: it works excellently on pellets, including straw pellets, agricultural waste, wood chips and coal. Models for firewood are also available.
This significantly reduces the cost of the process and allows the use of bio-waste.
We make heat generators with 2 types of burners: a round burner with a stirrer and a vertical fuel-feeding auger, and a V-shaped burner with a horizontal fuel-feeding auger; for firewood we use various grates and forced blast.
Intensive blast allows selecting the required combustion mode and maintaining a constant outlet temperature of the heat generator.
Heat generator parts are made of high-quality heat-resistant steel; the furnace zone in direct contact with the flame is made of P355GH heat-resistant steel.
- Furnace and heat exchanger in one housing
- Triple pass of flame through the heat exchanger
- Stable outlet air temperature
- Full process automation from the control panel.
- Operational fuel hopper
- Fuel combustion coefficient – 91%
- Heat generator efficiency – 85%
- Fuel savings – 30%
- Fuel fraction 3 – 50 mm
- Controlled combustion
- Easy maintenance
- Safe equipment
P355GH
P355GH steel is boiler steel with a minimum yield strength of 355 MPa according to EN 10028-2. This steel is widely used in the EU for boiler parts, heat exchangers and pressure vessels and is applied in the oil, oil and gas and chemical industries. Its composition is ideal for applications where elevated temperatures are the norm.