ECO-TERM Grain Dryer – 3.0 t/h, model PGD-2105.400
- Description
- Specifications
- Price includes
- Advantages
Description
The solid-fuel grain dryer is designed for drying grain and oilseed crops using biomass fuel (agricultural waste, sunflower husk pellets, straw pellets, buckwheat and millet husks, wood chips, grain cleaning waste, as well as ordinary firewood and coal).
Advantages
By using a dryer on alternative fuel you get: - independence from the gas utility - no need to invest in expensive documentation, permits and gas metering and pressure-reducing units - no gas prepayments - low drying cost, as agricultural waste and pellets are used as fuel - a turnkey working complex and immediate profit - payback within one season with the dryer running 2 months in round-the-clock mode - a 2-year guarantee on all units - service (warranty and post-warranty) - Mobility. The dryer can be relocated. - Drying with clean air. Air is supplied to the dryer through a heat exchanger. - Durability. Heat generators with a heat exchanger made of 310S stainless steel. - Efficiency. The furnace and heat exchanger of the heat generator are in one housing. No heat loss. - Dry in heating and cooling mode. At unloading you get cooled grain. - You become our next satisfied customer and recommend us to your friends and colleagues.
Grain dryer payback calculator
| Solid-fuel grain dryer model | ECO – TERM PGD – 2105.400 |
| Number of modules | 1 |
| Number of grain columns | 5 |
| Dimensions | |
| Length, mm | 5.340 |
| Width, mm | 2.450 |
| Height, mm | 4.120 |
| Grain column dimensions, mm | 362×600 |
| Fans / Burners / Heat generator | |
| Heating module | Heat generator CHG-400 |
| Air volume supplied to the module, m³ | 24.000 |
| Supplied air temperature, °C | 120 |
| Heat generator capacity, kcal/h | 400.000 |
| Lower module – Cooling fans | 1 pc. |
| Electric motor, kW/rpm | 15,0 / 1450 |
| Fan diameter, mm | 1000 |
| Loading auger motor with double belt pulley, kW | 5,5 |
| Auger capacity, tons/hour | 30 |
| Grain unloading auger (lower) | |
| Loading auger motor with double belt pulley, kW | 5,5 |
| Auger capacity, tons/hour | 30 |
| Metering rollers | |
| Gear motor, kW | 2,2 |
| Roller capacity, tons/hour | 30 |
| Dryer capacity | depends on the calorific value of the fuel burned |
| Dryer capacity (volume), kg. | 9.500 |
| Values were taken using fuel with a calorific value of 5000 kcal/h. | |
| Dryer capacity (volume), kg. | 6700 |
| Drying with cooling | |
| Moisture reduction from 24% to 14%, crop: corn | 3.0 tons/hour |
| Other parameters | |
| Total power consumption, kW (including the heat generator) | 41.7 kW |
| Input voltage | 380 V, 3 phases |
| Warranty service | 2 years |
| Price FCA Istanbul | On request |
Price includes: – Shipment FCA Istanbul – Installation at the customer’s address, – Commissioning and staff training, – 2-year warranty. – Post-warranty service. Price does not include: – Duties and VAT in the importing country, – flights and accommodation for the installers during installation, – foundation preparation for the dryer is done by the customer.
By using a dryer on alternative fuel you get: – independence from the gas utility – no need to invest in expensive documentation, permits and gas metering and pressure-reducing units – no gas prepayments – low drying cost, as agricultural waste and pellets are used as fuel – a turnkey working complex and immediate profit – payback within one season with the dryer running 2 months in round-the-clock mode – a 2-year guarantee on all units – service (warranty and post-warranty) – Mobility. The dryer can be relocated. – Drying with clean air. Air is supplied to the dryer through a heat exchanger. – Durability. Heat generators with a heat exchanger made of 310S stainless steel. – Efficiency. The furnace and heat exchanger of the heat generator are in one housing. No heat loss. – Dry in heating and cooling mode. At unloading you get cooled grain. – You become our next satisfied customer and recommend us to your friends and colleagues.